All Products

English Français اللغة العربية Pусский Deutsch Español Italiano Polskie 日本語 Svenska Português 한국어 Türk
  • Current Location:
  • Home
  • All Products

All Products

JOEO is a leading manufacturer of climatic test chamber,vibration test system with over 20 years of experience. We offer high-quality products such as thermal test chamber, salt spray chambers,electrodynamic shaker, etc.

Altitude Test Chamber

Altitude Test Chamber

Application 

Altitude Test Chamber of JOEO factory is designed to allow users to perform temperature, humidity, and altitude condition tests in a combined test chamber, and create multiple conditions to meet multiple test requirements at the same time. 
Altitude chambers designed to simulate altitude conditions up to 100,000 feet. 
Provides simultaneous temperature/altitude testing from site altitude to 65,000 feet for high altitude test chamber testing. 
Humidity test can only be performed at the altitude of the site. 
Heated inspection window to ensure that the test room is clearly visible.

Details of Altitude Test Chamber:

Meets international standards DO160, ASTM, MIL-STD-781, -810
Altitude up-to 150,000 feet
Temperature range -70°C to +180°C, Humidity range 20 to 95%
 
Quick Inquiry View Details
Customize Salt Spray Chamber -Large Salt Spray Corrosion Test Chamber

Customize Salt Spray Chamber -Large Salt Spray Corrosion Test Chamber

Applicable Industry

JOEO Corrosion Test Chamber (SSTC) series of chambers are the industry’s most advanced, flexible and robust test chambers available anywhere in the world.

Salt spray corrosion test chamber can provide the user a wide range of controlled cycles to meet the greatest variety of Industry standard specifications.

Salt Fog Test DIN EN ISO 9227 – DIN 50 021
Condensed Water Test DIN EN ISO 6270-2 – DIN 50 017 and EN ISO 6988 – DIN 50 018
Standard Climate DIN 50 014, clause 5 ambient temperature
Quick Inquiry View Details
Salt Spray Test Machine- ISO 9227 SST Chamber

Salt Spray Test Machine- ISO 9227 SST Chamber

Applicable

JOEO Salt Spray Test Machine heating adopts titanium alloy electric heating tube. It has high corrosion resistance and long service life is 3-5 years higher than ordinary stainless steel heating tube. 
Cover is made of 5MM imported transparent (Germany YLIS) acrylic sheet. It has fine workmanship, beautiful appearance and high transparency.

SST Chamber -Salt Fog Test DIN EN ISO 9227 – DIN 50 021
Condensed Water Test DIN EN ISO 6270-2 – DIN 50 017 and EN ISO 6988 – DIN 50 018
Standard Climate DIN 50 014, clause 5 ambient temperature
Quick Inquiry View Details
IEC UL UN38.3 Vibration Shaker Machine For Batteries/LED Testing Vibration Test Setup

IEC UL UN38.3 Vibration Shaker Machine For Batteries/LED Testing Vibration Test Setup

Meet standard

IEC60068-2-64 Random shaker vibration test
IEC 6008-2-6 Vibration (sine) test Standard sine shaker vibration test method
GB/T 31486-2015 <Electrical performance requirements and test methods for traction battery of electric vehicle> Test requirements
UL 1642:2012 < Standard for Lithium batteries Vibration Shaker Machine>
UL 2054: 2012 < Household and Commercial Batteries>
UN38.3(2012) <Part 3: proposal for dangerous goods transport - test and standard manual>
IEC62133-2:2017 < Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications-Parts 2: Lithium systems>
IEC 62281: 2004 <The safety requirements in transport of Lithium battery and battery>
IEC 60068: 2007 <Galvanic cell part 4 the security requirements of lithium-ion batteries>
 
Quick Inquiry View Details
IEC 60068 Salt Fog Chamber of Cyclic Corrosion Salt Spray Chamber

IEC 60068 Salt Fog Chamber of Cyclic Corrosion Salt Spray Chamber

Applicable 

JOEO Cyclic corrosion salt spray chamber,salt spray chamber is tested the corrosion resistance capacity of products, which stay in the intense change environment, such as automobile parts, aviation equipment, photographic equipment, building materials, electricity, electrical and electronic systems.

Meet  Standard
IEC salt testing machine standards mainly include 
IEC salt spray testing according to the standard IEC 60068-2-11:1981 "Environmental testing of electrical and electronic products - Part 2: Test methods Test Ka: salt spray test methods" 
IEC 60068-2-52:2017 Environmental tests - Part 2: Test methods - Test Kb: salt spray, alternating (sodium chloride) solutions
Quick Inquiry View Details
Non-standard Hydraulic Vertical Shock Test

Non-standard Hydraulic Vertical Shock Test

Full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to evaluate the reliability and structural integrity of products in a shock environment. The system can perform conventional half-sine wave, post-peak sawtooth wave, square wave and other waveform shock tests to achieve the shock wave and impact energy that the product is subjected to in the actual environment, thereby improving the product or packaging structure.
Quick Inquiry View Details

Recommend Products

  • ESS Chambers-Temperature Humidity Chamber

    ESS Chambers-Temperature Humidity Chamber

    Application

    JOEO ESS chambers are suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test.
    This type of temperature humidity chamber mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability.
    It’s the aviation, automobiles, home appliances, research and other fields necessary test equipment.

    Meet Standards

    IEC 62133-2017
    UL 1642
    UN 38.3
    Quick Inquiry View Details
  • Vibration Test Equipment Sine Random Shock of Electric Vehicle Batteries(Water-Cooling）

    Vibration Test Equipment Sine Random Shock of Electric Vehicle Batteries(Water-Cooling）

    Sinusoidal excitation force range: 25 kN to 600 kN
    High frequency range, large amplitude range and adjustable, multi-axis phase, controllable acceleration, can complete the sine, random, impact test.
    Displacement peak-to-peak: 51 mm, 76mm or 100mm
    Electrodynamic shaker design with Random to sinusoidal excitation force ratio 1:1
    Vibration Directions: Vertical Vibration &Horizontal Vibration
    Completely Water-cooling systems




     
    Quick Inquiry View Details
  • Vibration Test Systems MIL STD 810G Test Shaker

    Vibration Test Systems MIL STD 810G Test Shaker

    Sinusoidal excitation force range : 1kN ~ 600kN
    Test shaker covered in MIL-STD-810G are used to simulate the vibration environment that a device may experience during transportation or operation.
    Shaker test equipment test specially developed for MIL-STD-810G international standard applicant in military units and related products.


     
    Quick Inquiry View Details
  • Panelized Walk In Test Large Environmental Chamber

    Panelized Walk In Test Large Environmental Chamber

    Application:

    From aerospace and avionics to refrigerators and automobiles, JOEO panelized large environmental chamber serve as testing grounds for components and finished products. Knowing the size, quantity, and test requirements of your product can help you determine the best chamber size for your application. If our standard equipment does not meet your test requirements, we will design a custom test box that can meet your test requirements.

    Quick Inquiry View Details
  • Walk In Test Chamber For CATL Battery

    Walk In Test Chamber For CATL Battery

    CATL  Battery Walk In Test Chamber

    JOEO Walk In Test Chamber's temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limitation, so as to generate thermal stress and strain in the product.

    It can set different stress screening temperature change rate 5℃/min,10℃/min,15℃/min,20℃/min 
    Walk In test chamber(ESS chamber) is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature cycling & temperature stress screening (ESS) test and constant humidity and cyclic damp heat test.
    Quick Inquiry View Details