IEC 60068 series standardsThe IEC 68 - 2 - (1 - 68) standard covers test methods for various environmental factors such as temperature, humidity, vibration, shock and light aging, and is used to evaluate and verify the performance and reliability of electrical equipment or electronic components under various environmental conditions.Test EQ chambers can support all of those customzie climate chamber: from temperature, humidity , pressure etc requirements , welcome to inquiry,thank you.
MIL-STD-810G High Temperature Test--Climatic Chamber
MIL-STD-810G High Temperature Test--Climatic Chamber
MIL-STD-810G test method was developed specifically for dod applications, but can also be customized for commercial applications and includes a variety of environmental tests, including: Low Pressure (Altitude) ,High Temperature,Low Temperature,Temperature Shock,Salt Fog ,Sand and Dust,Vibration,shock, this article is mainly about High temperature test 501.5 in MIL-STD-810G test method
RTCA DO-160G is a live document that contains environmental testing requirements for aircraft. The official title of the document is Environmental Conditions and Airborne Equipment Test Procedures.RTCA DO-160G is commonly used for hardening and stress testing of servers in military and commercial test standards, and is often used to evaluate computer server testing for supersonic transport aircraft, jumbo jets, helicopters, and general aviation aircraft.
ANSI EIA-364-32C thermal testing chamber for electrical connectors and receptacles
ANSI EIA-364-32C thermal testing chamber for electrical connectors and receptacles
The main purpose of this test is to evaluate the electrical resistance of a specific electrical connector or socket in extremely high and low temperature environments, as well as the performance changes after repeated temperature shocks in these harsh conditions. This simulates the worst-case scenarios that the connector may encounter in the worst possible storage, transport and use cases, thus verifying its reliability and durability in extreme environments. This comprehensive performance testing helps to ensure that connectors can operate reliably in real-world applications and meet the requirements of product design and use. By simulating the performance in harsh environment, it can provide a valuable basis for the reliability design of products.
As a dangerous product, lithium batteries need to be safely transported in strict compliance with relevant regulations and standards. Section 38.3 of the United Nations Manual of Tests and Standards (UN 38.3) sets out a series of testing and packaging requirements that lithium batteries should meet during transport to ensure that there are no safety hazards during transport. In addition, the International Air Transport Association (IATA) and the United States Department of Transportation (DOT) have also formulated corresponding domestic and foreign regulations for the transportation of lithium batteries.In the United States, for example, the Department of Transportation has established regulations for the transportation of lithium batteries within the United States under 49 CFR Sections 100 to 185. These regulations require that before the lithium battery is transported, the battery must be strictly tested and the corresponding packaging measures must be taken to reduce the risk of fire, explosion and other safety accidents caused by the battery during transportation.
ISO 16750 certification is designed to qualify road vehicles. This document specifies environmental procedures and tests for electrical and electronic equipment. In fact, it applies to the electrical and electronic systems/components of the vehicle.It describes potential environmental limitations and specifies recommended tests and requirements for specific mounting locations on/inside the vehicle
Temperature test standard1. Temoerature Thermal Shock Test Chamber:LED temperature shock tests have various combinations of shock temperatures, negative return times and cycle times, and can be cold.In-depth analysis of the international LED environmental reliability test standards (IEC/ISO/MIL), covering core experimental requirements such as temperature cycling, wet heat aging, and vibration stress. The TEST EQ vibration test chamber provides precise temperature and humidity control (-70℃ to 150℃, 10% to 98%RH) and multi-axis vibration simulation (5 to 2000Hz). The built-in intelligent module matches the test parameters in real time to ensure that the products meet the strict certifications of automotive electronics, aerospace, etc. Download "LED Failure Analysis Case Collection" to get customized verification solutions!
IEC60068-2-66 Pressure Accelerated Aging Test Chamber (HAST)
IEC60068-2-66 Pressure Accelerated Aging Test Chamber (HAST)
Pressure Accelleration aging test chamber -HAST Environmental testing Part 2: Test methods Test Cx: Damp heat, steady state (unsaturated pressurized vapour) PCT Chamber, HAST chamberTEST EQ Pressure accelerated aging test chamber(HAST chamber) strictly follows IEC 68-2-66 international standard, simulates high temperature, high humidity and high pressure environment, accelerates product life test. The Test chamber is equipped with precise temperature and humidity control (105°C-150°C, 75%-100%RH), rapid voltage rise (≤15 minutes), and multiple safety protection systems, making it suitable for reliability verification of semiconductors, PCBS, and electronic components. Through HAST/PCT test chamber , the customer can reduce the traditional 1000-hour aging cycle to 96 hours, significantly improving R&D efficiency and reducing quality inspection costs
IEC 60068-2-53 Temperature/Humidity/Vibration Test Equipment
IEC 60068-2-53 Temperature/Humidity/Vibration Test Equipment
Environmental testing Part 2-53: Tests and guidance-Combined climatic (temperature/humidity) and dynamic (vibration/shock) testsIEC 60068-2-53 is a core environmental test standard formulated by the International Electrotechnical Commission, covering comprehensive test methods of multiple factors such as temperature, humidity and vibration, and is used to evaluate the reliability and durability of products in complex environments. The TEST EQ three-combination test chamber strictly adheres to this standard, providing integrated testing capabilities with temperature control from -70℃ to +150℃, humidity range from 10% to 98%, and vibration frequency band from 5Hz to 3000Hz, and supporting customized testing programs. By precisely simulating extreme working conditions, it helps customers in the military, automotive, and electronics industries accelerate product research and development and quality verification.
IEC60068-2-40 Basic environmental testing procedures Part 2-40: Tests - Test Z/AM: Combined cold/low air pressure testsIn the face of increasingly complex reliability testing requirements, accurately reproducing harsh environments (high temperature/low temperature + low air pressure) is of vital importance. The TESTEQ high and low temperature combined low air pressure test chamber is specially designed to meet or even exceed the requirements of international standards such as IEC 60068-2-40. We are well aware that standard tests are sometimes insufficient to cover your unique challenges. Therefore, TESTEQ offers a powerful non-standard customization capability. Whether you need special temperature change rates, ultimate pressure points, complex cycle programs or specific cabin structures, we can tailor them to your needs to ensure that the test conditions perfectly match your product verification goals. Choose TESTEQ to get a reliable environmental simulation solution that truly meets your specific needs.
Standard compliance: Clearly indicate the core requirement of IEC 68-2-39 (i.e. Z/AMD test) - combination test of low temperature, low pressure and wet heat sequence; Equipment performance parameters: the temperature range in the search results (85 ℃ ~ 150 ℃), rate (5 ~ 15 ℃ / min) and the load verification technology; Applications: associated military standard (MIL/GJB) and mean temperature technology, outstanding equipment authority in stress screening.
IEC 68-2-13 is a standard for environmental testing developed by the International Electrotechnical Commission (IEC), which specifically specifies the methods of testing under temperature change conditions. This standard is part of the IEC 68-2 series of environmental test standards, aiming to evaluate the performance and reliability of products under different temperature conditions
