All Products

All Products

all (climate chamber manufacturers humidity control chamber vibration test system and walk in environmental chamber)

New Design 2024 Salt Spray Tester with  ASTM Salt Testing Machine

New Design 2024 Salt Spray Tester with ASTM Salt Testing Machine

Application

Salt spray testing is a method of checking the corrosion resistance of coatings and materials used to make products such as fasteners. It is an accelerated corrosion test that simulates corrosion in Marine climates and other harsh environments by producing corrosive gases and moisture containing sodium chloride in a salt spray laboratory. 
Salt testing machine can be used to assess the corrosion resistance of materials and compare the properties of different materials in a short period of time.

Test Method of SST Chamber
 Salt spray test methods are often used: neutral salt spray (NSS) test, acetate spray (ASS) test, copper accelerated acetate spray (CASS) test.
Salt Spray Cabinet-ASTM B117 Combine Climate Testing Chamber

Salt Spray Cabinet-ASTM B117 Combine Climate Testing Chamber

Introduction 
• Can adjustable temperature and time settings 
• Continuous, single climate cyclic corrosion test 
• Neutral pH salt spray standard ASTM B117
• Capacity range 430L to 2500L

Climatic Test Chambers

Climatic Test Chambers

Application

Climate test chambers are commonly used in electronic appliances, military, plastics, hardware, chemical, textile and other industries. Specific test products such as electronic parts, automotive parts, notebooks, batteries, packaging, cosmetics, circuit boards, temperature, moisture meters, etc.

JOEO climate chamber manufacturers are available in many pre-designed and customized sizes to meet your exact test requirements, and the models available for environmental chamber testing include a wide range of temperature ramp rates, humidity levels, and many standard and optional features, including temperature cycling, steady-state testing, and rapid rate of change. Other options include access ports, explosion-proof, quiet mode, additional shelving, battery safety options, dry air purge, dehydrated water filtration system and more.

 

JOEO Environmental Test Chambers manufacturers

JOEO Environmental Test Chambers manufacturers

Application

Environmental chamber manufacturers are widely used to test the heat resistance, cold resistance, dry resistance, moisture resistance of various materials,
JOEO environmental test chambers has a unique design and high-quality materials, whether you are testing aerospace products, electronic instruments, materials, food, medical, electronic and electrical products and various electronic components, JOEO environmental test chamber can give you the perfect solution.

Walk In Salt Spray Chamber (Temperature Humidity Combine Salt Spray)

Walk In Salt Spray Chamber (Temperature Humidity Combine Salt Spray)

JOEO Walk In Salt Spray Chamber is different from basic salt spray test chamber.Walk In Salt Spray Chamber exposes sample to a series of different environments in repetitive cycles that incorporate temperature , humidity, salt spray and dry. 
Accelerated corrosion test methods included ASTM B117, ASTM BG85, ISO9227, IEC60068-2-52, iec61701-2, ISO7253 and many others.
 
Three-Zone Thermal Test Chamber

Three-Zone Thermal Test Chamber

Application 

Mainly used in aviation, aerospace, military units, electronics, IT industry and other test products in the surrounding atmospheric temperature changes under the condition of rapid change in the basic safety test of electronic components, parts and products (whole machine) to provide reliability test, product screening, and so on, at the same time through this test, product quality control.

Meet standards

GB/T 2423.1 (IEC60068-2-1);GB/T 2423.2 (IEC60068-2-2);GB/T2423.22;GJB 150.3A; GJB 150.4A; GJB 150.5A;GB/T10589; GB/T10592;GB/T11158

Recommend Products

  • ESS Chambers-Temperature Humidity Chamber

    ESS Chambers-Temperature Humidity Chamber

    Application

    JOEO ESS chambers are suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test.
    This type of temperature humidity chamber mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability.
    It’s the aviation, automobiles, home appliances, research and other fields necessary test equipment.

    Meet Standards

    IEC 62133-2017
    UL 1642
    UN 38.3
  • Vibration Test Equipment Sine Random Shock of Electric Vehicle Batteries(Water-Cooling)

    Vibration Test Equipment Sine Random Shock of Electric Vehicle Batteries(Water-Cooling)

    Sinusoidal excitation force range: 25 kN to 600 kN
    High frequency range, large amplitude range and adjustable, multi-axis phase, controllable acceleration, can complete the sine, random, impact test.
    Displacement peak-to-peak: 51 mm, 76mm or 100mm
    Electrodynamic shaker design with Random to sinusoidal excitation force ratio 1:1
    Vibration Directions: Vertical Vibration &Horizontal Vibration
    Completely Water-cooling systems




     
  • Vibration Test Systems MIL STD 810G Test Shaker

    Vibration Test Systems MIL STD 810G Test Shaker

    Sinusoidal excitation force range : 1kN ~ 600kN
    Test shaker covered in MIL-STD-810G are used to simulate the vibration environment that a device may experience during transportation or operation.
    Shaker test equipment test specially developed for MIL-STD-810G international standard applicant in military units and related products.


     
  • Panelized Walk In  Test Large Environmental Chamber

    Panelized Walk In Test Large Environmental Chamber

    Application:

    From aerospace and avionics to refrigerators and automobiles, JOEO panelized large environmental chamber serve as testing grounds for components and finished products. Knowing the size, quantity, and test requirements of your product can help you determine the best chamber size for your application. If our standard equipment does not meet your test requirements, we will design a custom test box that can meet your test requirements.

  • Walk In Test Chamber For CATL Battery

    Walk In Test Chamber For CATL Battery

    CATL  Battery Walk In Test Chamber

    JOEO Walk In Test Chamber's temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limitation, so as to generate thermal stress and strain in the product.

    It can set different stress screening temperature change rate 5℃/min,10℃/min,15℃/min,20℃/min 
    Walk In test chamber(ESS chamber) is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature cycling & temperature stress screening (ESS) test and constant humidity and cyclic damp heat test.