Test EQ

Features

1.Multi-Environment Simulation:

•Replicates accelerated corrosion in marine, industrial, or road salt conditions with cyclic temperature/humidity stress.

2.Advanced Control:

•7-inch HMI touchscreen with 100+ pre-set programs, real-time graphs, and remote monitoring via Wi-Fi/Ethernet.

3.Durability:

•FRP (fiber-reinforced plastic) housing, titanium alloy heaters, and quartz heating tubes for resistance to acidic/alkali corrosion.

4.Eco-Friendly Design:

•Closed-loop filtration system (recycles 70% of spray solution) and R290/R513A refrigerants (low GWP).

5.Safety & Maintenance:

•Leak detection, over-temperature cutoffs, and self-cleaning nozzles to minimize downtime.

Standards Supported

1.Global:

•ASTM G85 (Modified Salt Spray Tests), ISO 14993 (Corrosion of Metals).

2.Automotive:

•Volvo VCS 1027,1496, Ford CETP 00.00-L-467.

3.Military:

•MIL-STD-810H (Method 509.6), DEF STAN 07-35.

4.Regional:

•GB/T 10125-2021 (China), DIN 50021 (Germany).

1.Automotive:

•Accelerated corrosion testing for coated chassis, brake lines, and EV battery housings (e.g., SAE J2334).

2.Aerospace:

•Validation of turbine blades, fasteners, and avionics under combined salt fog and thermal cycling (MIL-STD-3312).

3.Electronics:

•IP-rated enclosure testing (IEC 60529) and PCB conformal coating evaluation.

4.Marine Engineering:

•Simulate offshore conditions for anti-corrosive paints, stainless steel welds, and sacrificial anodes.

5.Renewable Energy:

•Durability studies for solar panel frames and wind turbine components in coastal environments.