IPX 3 4 Rain Test Chamber

IPX 3 4 Rain Test Chamber

Application 
JOEO rain testing equipment,water spray test chamber,ip test chamber,rain test chambers is used to test the rain proof and waterproof performance of products. Its application fields include: electrical and electronic products, digital equipment, steam locomotive lamps, wiper performance, motorcycle instruments, national defense industry, navigation system, missiles, radar cone, aviation and space industry industry, etc

Standard 
IEC60529 , JIS D0203 , D5500,  SAEJ585e , CNS 7138

 

Description

Introduction 

JOEO Rain Test Chamber,rain spray test chamber is a testing equipment used to test the waterproof performance of products. It usually uses a special sprinkler system and a rotating table, which can simulate the impact and immersion of different intensities of rainwater on the product to test its waterproof performance. JOEO water spray test equipment is an international standard used to test the protective performance of products in wind and rain environments, while ensuring that the interior of the product is not subject to water penetration and erosion. Usually used to test the protective performance of electronic products, automotive components, aerospace equipment, etc. in rainwater environments.

Features

  • The shell is made of high-quality domestic steel plate, and the surface is sprayed with drying varnish, which is beautiful and durable.  
  • The inner chamber, turntable, and swing tube are all made of SUS304 # stainless steel plate to ensure long-term use without rusting.  
  •  JOEO spray test chambers install a water level float valve in the water storage tank to automatically control water intake and provide low water level alarm detection. There is a transparent observation window (made of tempered glass) on the door, and an LED light is installed inside the box for easy observation and internal inspection.  
  • The drip box adopts a vacuum design and is made of stainless steel; The contact position of the nozzle adopts a brass conical design, making it easy to install the nozzle.  
  • JOEO water spray chamber equipped with compressed air drying function. After the experiment, excess water in the drip irrigation box can be removed to avoid clogging the needle holes due to accumulated water and scaling.  
  • The swing tube drive adopts a high-quality domestic servo stepper motor, with accurate and adjustable swing tube speed and angle, without any out of step issues  
  • Turntable drive: Adopting high-quality domestic stepper motors, the speed and angle can be set on the touch screen (adjustable), precise and stepless within the standard range, and can automatically control the forward and reverse directions (forward and reverse directions: suitable for testing with samples on power to prevent wire winding)

 

Model IPX34-D200 IPX34-D400 IPX34-D600
Swing pipe radius D200mm D400mm D600mm
Internal Dimension WxHxD (mm) 500×500×500 900×900×900 1300×1300×1300
External Dimension WxHxD (mm) 1000×680×1440 1400×1120×1750 1800×1520×1950
Flow 0-1L/min 0-2L/min 0-3L/min
Number of holes(pcs) 12 25 37
Orifice diameter φ0.4mm
Distance betwwen nozzles Per Interval 50mm have a Nozzle
Swing angle 120° (IPX3)350°(IPX4) or Customized
Rotation mode Always corotation/Positive and negative rotation /Spacing rotation
Power requirement AC 220V
Safety protection measures Leakage protection, water shortage protection,
 short circuit protection